Join thousands of customers who've already shopped with us
Remote Control Duplicator - 4-in-1 Universal for Car, Garage Door, Gate
Remote Control Duplicator - 4-in-1 Universal for Car, Garage Door, Gate
Easy 30-Day Returns
Secure Payment at Checkout
Couldn't load pickup availability
Laura
ARE YOU AFRAID OF FORGETTING YOUR REMOTE CONTROL KEYS AND HAVING TO PAY THE MANUFACTURER A LOT TO GET NEW KEYS?
The simplest and least expensive way to duplicate any wireless remote, vehicle key, garage door opener, and more is with the Remote Control Duplicator!
This device transmits signals to replicate your current remote controls, ensuring that you always have a backup key or remote in case you misplace the original.
You may carry four remotes in one thanks to the device's ability to clone up to four remote buttons from the same or other remotes! A separate remote-controlled key can be opened by each of the corresponding letters (A, B, C, and D).
Instead of carrying two keys, you may use a single remote control to unlock your car and open your garage door.
Data encryption makes the smooth infrared connection safe and secure to use.
Any wireless remote key that works can be copied, and each password is saved separately.
- Copying is simple and takes only a few minutes.
- Design of a portable keychain
- Elevated frequency
USE GUIDE
Clear code: Hold two buttons (A and B, B and C, etc.) with both fingers simultaneously; the LED will flash three times quickly in about two seconds; release one finger (the other finger should remain holding one of the buttons) and use the free finger to rapidly click on the loose button three times until the LED light flashes; then release both fingers and press any key on the remote control.
When the LED light turns off, it denotes that the code was correctly cleared (all four keys are empty); if the light remains on after pressing any remote control button, it shows that the original code was not successfully erased. You must re-clear, and cloning can only be accomplished if the code is cleared. The code can be repeatedly cleared and cloned.
Copy: hold the original remote control in your left hand, our remote control duplicator in your right, and keep the two remote controls as close together as you can; When you simultaneously press the first buttons on two remote controls, the LED light will flash twice in about two seconds. After a second, the indicator light continues to flash and releases your fingers. You can then press the key to turn on the light after pairing successfully, which indicates that the first key code on the original remote control has been copied to the other remote control. You can also use the same technique to turn on the second key, the third key, etc. The function of the remote control is identical to that of the original matching remote control if the copy is successful.
Restore: If you unintentionally erase the remote control code copy, you can press the bottom two keys at the same time. The LED lights will flash rapidly and release when you hit any key. When the light is long, it means that the remote control code has been recovered. Please make sure that the remote control's current code is removed before using our copy.
When some keys have control while the others do not, how should one handle the situation?
Clear and restore operations are available to you; the precise operation is as follows:
clean code first;
Copy the failed key once more after the code has been cleared; the remaining buttons do not need to be copied;
after which the code is cleared once more;
At this point, the original keys that were successfully cloned are kept, while the original keys that were unsuccessfully copied are now covered by new codes. Repeat the previous steps repeatedly until all of the keys have been successfully duplicated if there isn't a copy after the second copy.
